Description And Use; Warning; Caution; Connection With Vort Prometeo Hr 400 - Vortice VORT PROMETEO HR 400 Notice D'emploi Et D'entretien

ENGLISH

Description and use

"External RF Module" is an optional radio operated
device aimed at allowing the normal transmission of
commands to the Vort Prometeo HR 400 using the
remote control unit that comes supplied with the
system even where the location chosen for the
installation of the system is shielded from receiving
radio waves.

Warning:

!
this symbol indicates that care must
be taken to avoid injury to the user
• Do not use this appliance for functions other than
those described in this booklet
• After removing the appliance from its packaging,
ensure that it is complete and undamaged. If in
doubt contact a professionally qualified electrician
or Vortice.
• Never allow children or infirm persons to use the
appliance unattended. Children must always be
supervised to ensure that they do not play with the
appliance.
• Do not use the appliance where flammable
vapours are present (spirit, insecticides, petrol,
explosives, etc.

Caution:

!
this symbol indicates that care must
be taken to avoid damaging the appliance
• Do not make modifications of any kind to this
appliance.
• The maintenance instructions must be followed to
avoid damage and/or excessive wear and tear to
the appliance.
• Do not expose this appliance to the weather (rain,
sun, etc.).
• Regularly inspect the appliance for visible defects.
If the appliance does not function correctly, do not
use it and contact Vortice immediately.
• Should the appliance be dropped or suffer a heavy
blow, have it checked by Vortice immediately.
6
Connection with
Vort Prometeo HR 400
Connecting the "External RF Module" to the Vort
Prometeo HR 400 means that the radio device fitted to
the mother board is automatically disconnected and
all the relative functions are transferred to the
"External RF Module".
1 1
VORT PROMETEO HR 400
≤ 5 m