Publicité
Les langues disponibles
Les langues disponibles
Disposal of packaging materials
The packaging protects the appliance from damage during carriage. The pack-
aging materials have been selected for their environmental friendliness and ease
of disposal, and are therefore recyclable.
Returning the packaging to the materials cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations.
NOTE
►
If possible, keep the original packaging of the appliance during the warranty
period so that the appliance can be packed properly for returning in the
event of a warranty claim.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics
20–22: Paper and cardboard
80–98: Composites
Installation
1. Place the scales on a level, firm surface.
2. Place the cradle 3 on the two protruding pins 4. The holes for the screws 2
must be above the gaps for the pins 4.
3. Push the screws 2 through the holes in the cradle 3 from above and screw
them in using a Phillips screwdriver.
4. Place the weighing bowl 1 on the cradle 3.
NOTE
►
The appliance may only be used when fully assembled.
EKWC 5 A2
GB │ IE
│
15
■
Publicité
Chapitres
