Rosenbauer HEROS-xtreme Mode D'emploi page 39

Then reinstall the entire interior harness
using the reverse procedure.
8.4 Replacement of the complete interior harness, including head net.
As described in Section 8.3., loosen the three main screws, remove the shaft of
the mechanism from the turning knob and then take the entire interior harness
out of the helmet. Reinsertion takes place using the reverse procedure.
8.5 Neck protection mounting
The neck protection is secured at three
points (left, right and centre rear). To
attach the neck protection, guide the
nipples into the plastic strips in the
three holders (begin on either the left
or right).This functions best, if the
attachment arm is pressed lightly away
from the helmet shell.
9. Order numbers: HEROS-xtreme
Destignation
HEROS-xtreme
HEROS-xtreme
HEROS-xtreme
HEROS-xtreme
HEROS-xtreme
HEROS-xtreme
HEROS-xtreme
HEROS-xtreme
HEROS-xtreme Adapter
luminescent
fluorescent red
fluorescent yellow
luminescent
fluorescent red
fluorescent yellow
blue
black
white
silver
red RAL 3020
User Guide HEROS-xtreme - Rosenbauer
OrderNo:
156800
156801
156802
156804
156805
156806
156807
156808
156800/156831
156801/156831
156802/156831
EN
39 39