Spare Parts - Rosenbauer HEROS-xtreme Mode D'emploi

During reassembly of the textile components, care must be taken that when
closing the Velcro fastening, the join points towards the helmet and is therefore
not visible from the outside. Subsequently, the headband is reinserted into the
helmet using the reversed removal procedure.
5.2 Chinstrap cleaning
The chinstrap should be cleaned as
required. It is recommended that the
Velcro fastening on the head strap (below
the head net) be opened fully.
Subsequently, the two screws (hexagonal
socket) on the lateral chinstrap
anchorage are to be loosened.
Following the opening of both short neck straps (adjacent to the adjustment
mechanism), the chinstrap can be slipped out and then washed in a washing
machine at 60°C.
During reassembly, it is recommended
that the head strap be inserted first. The
two neck straps should then be fixed and
the lateral screws mounted. Finally, the
chinstrap should be adjusted to the ideal
position as described in Section 4.4.

6. Spare parts

All spare parts can be simply exchanged.
Face protection visor, clear
Face protection visor, gold
Eye protection visor, clear
Eye protection visor, tinted
Front mask
Headband with cloth cover
Cloth cover for headband
Inner lining (complete)
Chin strap
User Guide HEROS-xtreme - Rosenbauer
156850
156851
156854
15685403
156857
156859
15687001
156863
156870
EN
35 35