Chinstrap - Rosenbauer HEROS-xtreme Mode D'emploi

Visors are wear parts and
should be stocked in sufficient
quantities.
The visors are located inside the helmet and can be swivelled outwards.
The protection against radiant heat provided by the visors depends on the
temperature of the heat source.
The visors should be used only in situations in which they can reduce
the exposure of the wearer's eyes to less than 100 W/ m2.
ATTENTION: The visor features anti-fog coating on the inside. The visor and the
coating must be meticulously cared for at regular intervals with warm water,
a soft cloth and, if necessary, mild dishwashing liquid. Visors should never be
cleaned when dry or using aggressive or abrasive materials.
Even with proper care, this coating has a limited resistance with corresponding
use.
Detachment of the inner display coating does not represent a defect; in this
case it is recommended you replace the visor.

3.4 Chinstrap

The trapezoidal shaped chinstrap is made of flame-retardant, highly
heatresistant material. In combination with the integrated padding, the chin-
strap ensures pleasant wearing. The chinstrap can be individually adjusted both
laterally and vertically in the neck area.
NOTE: This helmet fulfils the requirements of EN443:2008 for the strap
system if the chinstrap supplied by the manufacturer is worn and
adjusted according to these regulations.
3.5 Neck protection
The helmet is fitted with a neck guard. All the materials employed are flame
retardant and highly heat-resistant. The neck guards are secured to the interior
helmet harness and the helmet shell by a tension strip and are easily removed
for cleaning purposes. The neck guard offers generous cover for the neck and
ear areas without reduction of the hearing.
Neck protectors are wear parts; a sufficient number should be kept in stock.
The "Holland" all-round neck protection is optionally available in place of the
standard neck protection.
WARNING: The neck guard is a protective device, made of soft, flexible
material, which offers limited mechanical protection. Neck guards are
wear parts and should be stocked in sufficient quantities. In operations
in which a flashover or a similar event is to be expected, we strongly
User Guide HEROS-xtreme - Rosenbauer
EN
29 29