Guarantee & Service - Philips HD4419 Mode D'emploi

ENGLISH
10
6 Lift the grilling plate from the base by its handgrips (Fig. 9).
Note: If the thermostat unit is still inserted into the appliance, you cannot remove the grilling plate.
7 Soak the grilling plate in hot water with some washing-up liquid for five minutes or drizzle
some lemon juice onto the grilling plate. This loosens any caked food or grease.
8 Slide the drip tray out of the base (Fig. 10).
Note: The drip tray can only be slid out of the base in one way.
9 Clean the base and the drip tray with a damp cloth.
10 Clean the grilling plate and spatula/tongs with a soft cloth or sponge in hot water with some
washing-up liquid or in the dishwasher.
11 Dry the grilling plate, drip tray and spatula/tongs.
The inside of the thermostat unit socket must be completely dry before you reinsert the
thermostat unit into it. To dry the socket, wipe the inside with a dry cloth. If necessary, shake out
excess water first.
12 Reassemble the appliance.
Storage
1 Leave the thermostat unit in the grill. Wind the cord and fix it with the twist tie (Fig. 11).
2 Store the grill in upright position on a dry and level surface (Fig. 12).
Note: Make sure that the stoppers are at the bottom, so that the drip tray cannot fall out of the appliance.
Recycling
- This symbol means that this product shall not be disposed of with normal household waste
(2012/19/EU). (Fig. 13)
- Follow your country's rules for the separate collection of electrical and electronic products.
Correct disposal helps prevent negative consequences for the environment and human health.
Guarantee & service
If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com/support or contact the Philips Consumer Care Centre in your country.
You find its phone number in the worldwide guarantee leaflet. If there is no Consumer Care Centre
in your country, go to your local Philips dealer.
Food table (Fig. 14)