IEM Mobil-O-Graph PWA Mode D'emploi page 111

Error indication
Code 5 The Bluetooth interface of the Mobil-O-
®
Graph could not connect to the Bluetooth
dongle on the computer.
Code 6 The measurement value memory of the
Mobil-O-Graph
pressure values that have not yet been
sent.
Code 7 The Mobil-O-Graph
mobile phone or GSM modem which is
technically incapable of sending readings,
is outside the network range or is not
configured correctly.
Possible cause
®
does contain any blood
®
is connected to a
Remedy
Try it again.
If the error persists, send the device to your
specialist supplier or directly to IEM GmbH
for checking.
After taking further measurements, these
are sent.
Try it again.
If the error persists, please contact your
specialist supplier or IEM GmbH.
Troubleshooting
EN
109