Introduction; Purpose Of The Manual; Assistance; Receipt And Storage - Lofrans GALAXY 503 Manuel D'installation Et D'utilisation

1 INTRODUCTION

1.1 Purpose of the manual

This manual will supply information on safety and correct use of the product. Follow these warnings carefully to avoid possible
accidents or damages.
DANGER!
A warning such as this indicates the existence of a serious risk that has high probabilities to cause death or a serious accident if
appropriate precautions are not taken.
ATTENTION
!
A warning such as this indicates a reference to the application of safety practices, or draws the attention on unsafe behaviours
that might cause personal injuries or damages to the boat.

1.2 Assistance

The Lofrans products are backed throughout the world by a network of authorised distributors and assistance. In case of need,
please contact your local Lofrans distributor. Details on website www.lofrans.com

1.3 Receipt and Storage

Upon receipt of the package, verify the integrity of packing. Should it be necessary to store the product for a prolonged period,
keep it in a dry and protected place.

2 INSTALLATION

2.1 Contents of the package

- chain counter with extensible cable and fastening kit
(1 bracket with 2 screws);
- 6-pole connector tap with gasket, 4fastening screws with spacer
rings and plug;
- magnetic sensor;

2.2 Recommended accessories

Use exclusively original Lofrans accessories and spare parts, designed and manufactured to ensure performances, duration and for
keeping valid the warranty. For information on available spare parts, contact your local reseller or visit website www.lofrans.com

2.3 Installing the magnet on the anchor windlass

On a few models of anchor windlass the sensor and the magnet are already installed (chain counter setting).Therefore, the
operations described below are not necessary.
4
www.busse-yachtshop.de | info@busse-yachtshop.de
- support kit (support for the vertical shaft
anchor windlass sensor, supporting base, 2
fastening screws, O-ring);
- magnet;
- horizontal shaft anchor windlass sensor support;
- instructions for use.
Fig. 1B
GALAXY 503
Fig. 2B