Table des Matières
Publicité
8
Información Técnica:
-Temperatura limite para almacenaje, transporte e
instalación.
9
Mantenimiento del producto:
-Limpiar la superficie de las cajas con un trapo humedo
Reciclado del producto:
11
-Póngase en contacto con el punto de venta, con las autoridades locales o con al fabricante:
Instructions for use and safety
1
General view:
Normative: -Follow these instructions to comply with the R.D. 842/2002, directive 2014/35/UE (DBT) and EN 60670-22.
2
- Installation, service and maintenance of the electrical equipment may be carried out by anauthorized person only.
3
Description and components: -Protection IP65 / 55 *; - Protection IK08; -Boxes for indoor and outdoor use .;
-Class II; - Incandescent thread 650ºC.
Features:1- Screw captive; 2- Despondable drain; 3- Ticket identifier; 4- Screw and cover with seal system; 5- Towers for
4
fixing plates or DIN rail; 6- Alignment marks; 7-Holes for fixing external supports and / or flanges; 8-Despondable tickets.
5
Accessories (not included): A- Plugs for fixing holes (TPO-715); B- Support for fixing to tray or metal grid
(SOP-716Y) .; C- Support for external wall mounting (SOP-715Y).
6
General assembly instructions: 1- To break the defrostable entries, rest the box on a rigid surface and the
screwdriver with a wide blade on the corresponding slot, and give a dry blow .; 2- Fixing the security seals:
Place the screw in the closed position, and pass the security seal through the holes in the cover and the screw.
Repeat process on the opposite screw. COVER, SECURITY SEAL AND SCREW.
7
A-Through internal fixation. 1.- Drill the box at the points indicated .; 2.- Mark points on the wall and make
holes .; 3- Pass the screws through the holes in the box and screw in the wall block .; 4.- To improve the
tightness, place the TPO-715 plug (not supplied) in the towers where the log has been fixed.
B-By fixing through the holes in the corners .; 1.-Make the holes in the wall at the appropriate distance .; 2.-
Pass the screws through the holes in the corners and screw in the wall plug.
C-Through external wall support .; 1.- Fix the supports SOP-715Y (not supplied) in the holes enabled in the
base of the box. They are fixed by pressure .; 2.- Mark and make the holes in the wall .; 3.- Fix the box.
D-Through metal grid support .; 1.- Fix the supports SOP-716Y (not supplied) in the holes enabled in the base
of the box. They are fixed by pressure .; 2.- Fix the box on the rack in the desired place.
E-Through flanges .; 1.- Pass the flange through the holes enabled in the base of the box .; 2.- Fix the flange
on the desired post or fixing bracket.
Technical information: -Temperature limit for storage, transport and installation.
8
9
Product maintenance: -Wipe the surface of the boxes with a damp cloth.
PORTALAMPARAS Y ACCESORIOS SOLERA S.A.
Polígono Industrial Fuente del Jarro.
C/. Villa de madrid, 53.
Tel. +34 96 132 23 01 / +34 96 132 23 52
46988 Paterna, Valencia, España.
www.psolera.com
* Protection for boxes with IP55 cones
10
-4-
Consejos de
seguridad y uso.
ENGLISH
Halogen Free
Publicité
Table des Matières
