Function And Features; Electrical Connection - IFM Electronic efector800 VE111A Notice De Montage

Observe the instructions for the safe use in hazardous
areas (→ → Operating instructions ATEX-3D/3G).

Function and features

• vibration diagnosis (up to 20 freely selectable frequencies) or up to
5 different rolling element bearings
• adjustable diagnostic level
• spectral analysis FFT, envelope curve-FFT, trend analyis

Electrical connection

The unit must be connected by a suitably qualified person. The
applicable national and international regulations for the installa-
tion of electrical equipment must be observed.
Voltage supply according to EN50178, SELV, PELV.
Disconnect power before connecting the unit.
The outputs are short-circuit proof to 100mA.
M12
Pin 1:
Pin 2 red function:
3
Pin 3:
4 2
Pin 4 yellow-function:switching output 1, 100mA,
5
1
Pin 5:
M8
Pin 1:
3
Pin 2:
4
Pin 3:
2
Pin 4:
1
supply +
switching output 2, 100mA,
NC/NO programmable
supply -
NC/NO programmable
rotational speed (0...20mA) or
pulse input
not connected
B
not connected
A
5