SOLAC BE1002 Mode D'emploi page 11

ONCE YOU HAVE FINISHED
USING THE APPLIANCE:
Turn the appliance off using the
•
on/off button.
Remove the batteries from the
•
appliance if you are not intending
to use the appliance during an ex-
tended period.
Clean the appliance.
•
Put on the protective cover (A).
•
CLEANING
Remove roller by pressing the
•
eject button on the side of the
device.
Rinse the roller under running wa-
•
ter to remove the remaining impu-
rities and then dry.
Clean the equipment with a damp
•
cloth with a few drops of wash-
ing-up liquid and then dry.
Do not use solvents, or products
•
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
Never submerge the appliance in
•
water or any other liquid or place
it under running water.
SUPPLIES
Supplies can be acquired from
•
distributors and authorised estab-
lishments such as rollers for your
appliance model.
Always use original supplies, de-
•
signed specifically for your appli-
ance model.
Only the following type of batter-
•
ies must be used with the appli-
ance: LR6 (AA).
ANOMALIES AND
REPAIR
Take the appliance to an author-
•
ised technical support service
if product is damaged or other
problems arise. Do not attempt
to disassemble or repair the ap-
pliance yourself as this may be
dangerous.
FOR EU PRODUCT VER-
SIONS AND/OR IN CASE
THAT IT IS REQUESTED
IN YOUR COUNTRY:
ECOLOGY AND
RECYCLABILITY OF
THE PRODUCT
The materials of which the pack-
•
aging of this appliance consists
are included in a collection, clas-
sification and recycling system.
Should you wish to dispose of
them, use the appropriate public
recycling bins for each type of
material.
EN