GE 18 Manuel D'utilisation Et D'installation page 6

About the refrigerator shelves, bins and water dispenser.
Not all features are on all models.
Snugger
6
Rearranging the Shelves
Glass and wire shelves in the refrigerator compartment are adjustable.
To Remove
2
Lift up and out
1
Tilt up
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you
to reach items stored behind others. The
special edges are designed to help prevent
spills from dripping to lower shelves.
Adjustable Door Bins
Adjustable bins can easily be carried from
refrigerator to work area.
To remove: Tilt the bin up and pull out
on the molded supports until it comes
completely out of the door.
To replace or relocate: Select desired height,
engage the bin in the molded supports of
the door and slide the bin in. The bin will
hook in place.
Brita Water Dispenser
®
To install: Grasp the dispenser as shown.
Using a slight backward tilt, align the
mounting brackets on the dispenser with
the support brackets in the refrigerator door.
Gently slide the dispenser back until it
touches the door and lower it into the
support brackets.
To Replace
1
Insert
top hook
2
Lower to
lock in place
Make sure you push the shelves all the way back
in before you close the door.
The snuggers help prevent tipping, spilling
or sliding of small items stored on the door
shelf. Place a finger on either side of the
divider near the front and move it back
and forth to fit your needs.
To remove: Tilt the dispenser up at the front
and pull it forward on the molded support
brackets until it comes completely out of
the door.