Unity I UT3K Manuel D'utilisation page 6

E
N
G
Front Panel
Lights,
L
Display,
I
and Keys
S
H
Front Door
(Keyswitch
and Serial
Number
Inside)
Serial Number
Figure 1
* The drawings in Figure 1 show a UT3K, UT4K or UT5K. The UT8K is similar in appearance.
101 Startup
1 If you have a UT3K, UT4K or UT5K: Attach the stabilizer bracket to the back of the
UPS (see Appendix B).
2 Open the UPS' front door by pulling the top of the door toward you (see Figure 1 to find
the door). Make sure that the keyswitch inside the front door is turned to "Off" (see
Figure 2).
If your UNITY/I has an input line cord and plug: Plug in the UPS. If the plug does not
3
match the wall outlet, have a qualified electrician install the proper wiring and outlet.
Figure 3
Front View*
Communication
Port
Grounding
Terminal
Stabilizer
Bracket
If your UNITY/I is hardwired (does not have an input line
cord and plug), an electrician should have installed the UPS. An
external bypass/AC disconnect switch should be mounted on the
wall nearby (see Figure 3). Turn the UPS AC LINE
DISCONNECT SWITCH to "ON" and the UPS BYPASS
SWITCH to "OFF."
4
Back View*
Output
Receptacles
(optional)
Main Output
Circuit Breaker
(some models)
Figure 2
Line Cord
DC Port