Introduction; 001 Storing The Unity/I Ups; 002 If You Have A Question - Unity I UT3K Manuel D'utilisation

Introduction

The UNITY/I™ UPS is easy to start and operate. Once you start the UPS, it provides continuous, computer-grade
power to your equipment. The UPS keeps you informed of its status with its front panel lights, four-digit display, and
audible signals (beeper). Using the display and front panel keys, you can display UPS information and program some
features.
This manual tells you how to start and operate the UNITY/I UPS. Begin with Section 100, "Starting the UNITY/I
UPS," which will help you determine whether you need to do any installation before you start the UPS.

001 Storing the UNITY/I UPS

If you are not going to use the UPS right away, store it between -20° and +40° Celsius (-4° to +104° F). If you remove
the batteries and store them separately, you can store the UPS at -20° to +60° Celsius (-4° to +140° F). Batteries have a
longer shelf life if you store them below 25° Celsius (77° F). Recharge stored batteries every 90 to 120 days.

002 If You Have a Question

Best Power is committed to outstanding customer service. Worldwide Service is happy to help you with your problems
or questions. A service technician is available 24 hours a day, 365 days a year. Just call Worldwide Service or the
nearest Best Power office, or send a fax to the Worldwide Service fax number. Please have your unit's serial number
available when you call; this number is inside the front door of the UPS.
If you prefer to contact Best Power via computer, you can use Best Power's World Wide Web site to get more product
information.
Best Power's toll-free Fax-on-Demand service is also available 24 hours a day to give you access to technical notes and
product information.
Worldwide Service:
Worldwide Service FAX:
World Wide Web Site:
Sales Fax on Demand:
Service Fax on Demand:
100 Starting the UNITY/I UPS
If your UNITY/I UPS does not have an input line cord and plug, it is a hardwired unit and must be installed by a
qualified electrician (see the UNITY/I Installation Manual). After a qualified electrician has installed the UPS, or if the
UPS has an input plug, follow the instructions in this section to start the unit.
Make sure that the UPS is near the equipment it will protect. Leave at least 4 inches (100 mm) space on top of and
behind the UPS for ventilation. Do not put the UPS near a source of heat.
Make sure that the temperature is 0° to 40° Celsius (32° to 104° Fahrenheit) and the relative humidity is 0 to 95%
without condensation. The air must be free of dust, chemicals that corrode or other contaminants. Air must be free to
move around the unit. The batteries' service life is longer if the operating ambient temperature stays below 25° C
(77° F).
1-800-356-5737 (U.S., Canada) or 1-608-565-2100
1-608-565-7642 or 1-608-565-2509
http://www.bestpower.com
1-800-487-6813 (U.S. and Canada)
1-608-565-9499 ext. 9000
3
E
N
G
L
I
S
H