poolstar France Sauna Manuel D'installation page 16

CORNER DESIGN
* After checking that the sauna is working correctly, we recommend that you screw the ceiling's plywood sheet tight to the upper
panel. As the sauna can reach very high temperatures, this part can often exhibit variations in shape, especially at the corners.
Important: The screws must be removed if you need to carry out maintenance.
30
Step 5
Position the upper sections of the bench and ensure that
it rests securely on the horizontal guides fixed to the side
panels.
Step 8
After moving the cables outside the cabin, carefully posi-
tion the ceiling over the cabin so as not to damage the
temperature sensor.
Pass the cables into the ceiling via
the openings provided.
Step 9
Connect the cables to the control box in accordance with
their coding (Cable A. Load A, Cable B. Load B, etc.).
The remaining cables must be
connected in accordance with the
number of pins on each connector.
Once the connections are complete,
position the protective plywood
sheet on the ceiling.*
ASSEMBLY
Step 10
On the outside of the door, position the handle in line with
the holes provided.
Insert the screws through
the inside of the door and
fix the handle.
The metal part must be on
the outside of the cabin.
Step 11 (option)
Plug the ionizer and screw it to his place.
Warning : Don't stay in the sauna when the ionizer is on.
Press ION to prevent diseases
of ventilation.
Press O3 for disinfection with
ozone.
EN
31