Kalorik AFO 44880 Mode D'emploi page 21

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Clean the accessory stand with damp cloth or sponge. Dry with a
paper towel.
Cleaning inside the cavity:
Wipe the cavity with a damp cloth or sponge. Dry with a paper
towel.
Never use abrasive products in the cavity!
Never immerse the appliance in water and make sure that no
water or moisture penetrates into the unit.
Clean the heating element inside the Smart Fryer Oven with a
cleaning brush to remove any food residue.
Cleaning the Smart Fryer Oven's exterior:
Wipe clean with a damp sponge or cloth. Wipe dry.
NEVER use steel wool, metal scouring pads or abrasive cleaners, as
they may damage the finish.
Do not let any liquids enter the air inlet on the top of the Smart Fryer
Oven.
Any other servicing should be performed by an authorized service
representative.
DO NOT IMMERSE THE FRYER IN WATER OR ANY OTHER LIQUID!
Storage:
Before storage, always make sure the appliance is completely cool,
clean and dry.
It is recommended to store the appliance in a dry place.
TROUBLESHOOTING
Problem
The Smart Fryer
Oven does not
work
www.KALORIK.com
Possible cause
The appliance is not
plugged in.
You have not
turned the unit on
by setting the
preparation time
and temperature
Put the main plug into wall socket.
Set the temperature and time. Press
on/off button to start.
21
Solution
AFO 44880 - 180330

Publicité

Table des Matières
loading

Table des Matières