Electrical Connections - Craftmade Kira KR52 Instructions D'installation

Electrical Connections

Connect black and blue (if provided) fan wires to black outlet wire.
Connect white fan wire to white outlet wire and green grounding lead
wire from the grounding conductor to the supply circuit (see figure A).
Use wire connectors provided with your fan. No loose strands or loose
connections should be present. After wires have been connected, they
must be spread apart so the green and white are on one side of the outlet
box and the black and blue are on the other side. Turn splices upward
and carefully push all wiring into outlet box. For optional wall control see
figure B or Figure C for alternate wiring. When wall switches are
employed, switches should be UL listed
for use with ceiling fan.
NOTE: Make sure fan on/off switch is always at "high speed" location if your fan is
controlled by additional wall switch.
Ground
White
Black
Blue
Black
Figure A
Green
White
Optional Light
Electrical Connections Continued...
Ground
White
Black
Black
Light Switch
Blue
Figure B
Ground
White
Black
Fan
Switch
Light
Switch
Figure C
Green
White
Optional Light
Black
Black
Green
White
Blue
Optional
Light