System Info - Maytag MHW9000YW0 Mode D'emploi

FOR SERVICE TECHNICIAN'S USE ONLY
COMPONENT ACTIVATION
Activation and functional testing of system
components (see Figure 7).
Figure 7 - Component Activation Menu
• Component Activation – When a
component is selected from the
Component Activation menu (see chart
below), a screen appears providing
component information, and if available,
attributes related to the component.
OUTPUT
UI Component Test
Door Status
Drum Light
Buzzer

SYSTEM INFO

Displays model and serial number, hardware
information, and other system variables.
NOTE: All non-selectable items will display a
short gray highlight preceding the selection;
however, as the highlight of the screen moves
over items with more information, it displays
regular background length. (Refer to Figures
8 & 9.)
NOTE: Missing system information does not
indicate a problem. The system information
screens are common across various washer
and dryer platforms; therefore, information
provided on one washer or dryer may not be
available on another. If uncertain about the
information, check with technical support.
DO NOT REMOVE OR
COMPONENT ACTIVATION MENU
ON/OFF DETAILS
YES Status (On/Off)
If the user interface does not respond, go to TEST #2, page 14.
N/A Status (Open/Closed)
• If opening the door does not change status, go to TEST #4, page 16.
YES Status (On/Off)
• If drum light does not turn on, go to TEST #5, page 16.
YES Status (On/Off)
• If buzzer does not sound, go to TEST #2, page 14.
DESTROY
Many of the components listed can be turned
on and off. By default, the component is off.
• UI Component Test
Whirlpool Models: (See Figure 1, page
2). Upon activation, all LEDs are turned
on. Pressing each button turns off its LED,
rotating the cycle selector knob turns off
each corresponding cycle indicator, and
pressing the buttons around the LCD
changes their on-screen representation
from black to green.
3 Press and hold the right-most navigation
key to return to previous screen.
Maytag Models: (See Figure 2, page 3).
Upon activation, all LEDs are turned on.
Pressing each button turns off its LED,
rotating the cycle selector knob and pressing
the buttons around the LCD changes their on-
screen representation from black to green.
3 Press and hold the left-most navigation
key to return to previous screen.
Figure 8 - System Information Screen
Non-selectable items
Figure 9 - Hardware Information Details
Items with more info.
PAGE 7