Repairs; Disposal - Simco ION Performax Easy Ex Mode D'emploi

10 Repairs

Warning:
- Disconnect the power supply before carrying out work on the unit.
- Work must only be carried out on the equipment by an electrical engineer with the
relevant training and must be conducted in accordance with national and local
regulations.
The components of the Performax Easy Ex (Speed) cannot be repaired. For ordering
replacement parts see the list of replacement parts.
By problems or questions contact Simco-Ion or the local representative.
Simco Ion provides advise to return the repairs back to Simco-Ion.
To do this, request an RMA number by going through the procedure at www.simco-ion.nl/repair.
Pack the anti-static bar properly and clearly mark the RMA number on the outside of the
package.
- For dismounting the anti-static bar: see chapter 5.6.

11 Disposal

At the end of its service life, do not throw the device away with the normal waste but
hand it in at an official collection point.
By doing so, you will help to protect the environment.
PerformaxEasyExPerformaxEasyExSpeed_UM_9752153010_NL_D_ GB_FR_V2_3
FR
71