KitchenAid KICA0WH Instructions page 10

CMD + SHIFT CLICK TO CHANGE COPY ASSEMBLING THE ICE CREAM MAKER
Step
No Spring
Determine your mixer model by
3
checking for a spring on the beater shaft,
and then position the drive assembly as
illustrated for proper placement.
Raise the bowl to engage the dasher
5
with the drive assembly before mixing.
If the drive assembly doesn't engage the
dasher, slide the drive assembly either
back or forward until it does engage the
dasher properly.
Plug the mixer into a grounded 3-prong
6
outlet.
10
No Step
Spring
4
Slide drive assembly onto the motor
head until it will not slide any further.
When properly assembled, the outer
curved edges of the drive assembly
should center on the motor head. If
they are not centered, slide the drive
assembly either back or forward until it
is centered on the motor head. Make
sure the drive assembly is securely in
place by pressing upward.