Long Term Storage; Troubleshooting; Specifications - Allmand MAXI-POWER MP15XR Manuel D'utilisation

Long-Term Storage
Proper maintenance is required when the unit will be stored
or removed from operation for long periods of time.
Refer to the Engine Operator's Manual and the Generator
Operator's Manual for all engine and generator long-term
storage procedures.
1. Make any repairs necessary to make sure the equipment
is fully functional upon recommissioning.
2. Clean and wash the frame and body panels. Apply an
anti-corrosion coating to all surfaces where applicable.
3. Clean any oil or liquid spills inside the engine
compartment.
4. Drain the fluid containment system.
5. Clean all electrical wiring and components by hand using
non-corrosive cleaner.
6. Disconnect and remove the battery.
7. Use a suitable cover to protect the unit.
8. Properly support the trailer axle on jack stands or other
suitable supports to allow the tires to remain off the
ground during storage.
Models and Serial Numbers
Model and serial number information is required for product
support and repair parts. Following are the model and serial
number locations of the primary components.
Trailer
The serial number plate for the trailer is located on the left
front side of the unit (A, Figure 18).
18
Generator
The generator has a serial number plate (A, Figure 19)
attached to the side of the housing.
19
Engine
The engine has a serial number plate (A, Figure 20) attached
near the top of the engine.
20

Troubleshooting

Before performing any troubleshooting procedures, read
Safety.
For engine and generator troubleshooting, refer to the Engine
Operator's Manual and Generator Operator's Manual, or
contact your dealer.
For all other issues, contact your dealer.

Specifications

Overall Dimensions
Dimension Imperial
Length 10 ft - 6 in
Width 6 ft - 5 in
Height 6 ft - 2 in
Bottom Clearance 8.5 in
Metric
3,20 m
1,96 m
1,86 m
216 mm
17