Table des Matières
Publicité
Electrical Connections Continued...
Ground
White
Black
Fan
Switch
Light
Switch
Blue
Figure C
Common Problems
Problem A: Fan Will not Start
Remedies:
1. Check fuse or circuit breaker and replace if necessary
2. Turn off electrical power and check all wire connectors.
3. Check on/off TCS and wall control selector switch. See operation
instructions.
Problem B: Fan is Excessively Noisy
Remedies:
1. Check that all screws in fan assembly are tight and properly seated.
2. Check to make sure mounting bracket is installed properly.
3. Check to make sure light kit and glass reinstalled properly and tight.
4. If wall control is used, insure the wall control is not a transformer or
a variable speed type.
Problem C: Fan Wobbles
Remedies:
1. Check that all blades are screwed firmly into blade holders.
2. Check that all blade holders are screwed firmly into motor.
3. Check the weight of blades. All our blades are weighed on electronic
scales. The weight is marked on the reverse side of the fan blade near
the motor end. All of the blades should be the same weight to
prevent fan from wobbling.
4. A balancing kit is enclosed if needed.
PRODUCT MODEL
WEIGHT (LBS)
AT52
CXL42
FI52
P252
PX52
SN52
Black
Black
Green
White
KILOGRAMS
17
7.7
17
7.7
20.1
9.1
21.3
9.7
19
8.6
17
7.7
Composants inclus
Pièces
Quantité
1. Support de montage
2. Assemblage de la tige de suspension
Tige de 15 cm (4 po )
3. Coupelle
4. Couvre-bride
5. Boîtier du ventilateur et du moteur 1
6. Bras de pale
7. Pales (vendues séparément)
8. Assemblage du boîtier
de l'interrupteur
9. Kit d'équilibrage
Paquet de vis
Quantité
S1. Vis à bois
S2. Vis (pour coupelle)
S3. Vis et rondelles des supports
S4. Vis des pales
S5. Vis du moteur
(quatre vis sur le moteur)
S6. Connecteurs de fils
S7. Boulon et écrou de sécurité
S8. Chaînes de traction
S9. Vis du boîtier d'interrupteur
S10. Crochet en « J »
S11. Bride
1
1
3
1
1
4
1
5
6
5
Phoenix
1
1
8
7
S1
S2
2
3
S3
S10
2
16
S4
11
3
S5
1
2
1
S6
1
1
S7
S8
2
5
S9
S11
®
Publicité
Table des Matières
