Important - Bebeconfort TobiFix Mode D'emploi

EN
become very high, particularly after a long
period of exposure to the sun. It is strongly
recommended, under such conditions, to
cover the seat of the car with a piece of
material or something equivalent to prevent
the harness fixings, and in particular the
metal parts, from becoming hot and burning
the child.
• After putting your child in the seat, ensure
that the harness straps are properly tight.
Also ensure that the strap is not twisted.
WARNING:
Never combine two ISOFIX anchorage and car
seat belt systems to install your child car seat.

IMPORTANT:

In ISOFIX use, the fitting clips for lower
anchorage to the vehicle is not sufficient. It is
essential to fix the "Support Leg". The ISOFIX
anchors have been developed to obtain a safe
and easy fixation of the child safety systems
inside the car. Not all cars are equipped with
these anchors although they are standard on
more recent models. Consult the attached list
of cars for which the car seat can be installed
correctly (you can also consult additional
updates of this list on the website www.bebe-
confort.com).
• In forward facing position (GR1), the seat
20
must be placed on the car rear seat or
exceptionally on the front seat in
accordance with the legislation in force in
the country of use (In France: in accordance
with the conditions stipulated in decree n°
91-1321 du 27-12-1991). If you use the
TobiFix on the front seat, it should be
possible to deactivate the Air-Bag of the
seat in question or move the passenger seat
back to a maximum (Please consult your car
manual).
• The TobiFix support leg must always be
unfolded completely, locked and placed in
the most forward position (green indicator).
• Warning: when installing the car seat,
spaces between the base of the car seat and
the vehicle seat are possible depending on
the position of the anchorage points within
the vehicle.
• It is essential that the car seat be replaced
after an accident.
• The user must always check that any
luggage and other objects likely to cause
injury to the occupant of the car seat in the
case of impact are properly secured.
• The rigid parts and the plastic sections of a
child restraint device should be positioned
and installed in such a way that they cannot,
when the vehicle is being used under normal
conditions, become trapped under a moving
seat or in the vehicle door. Always check