Replacing The Oven Light; Removing The Oven Door - Fulgor Milano PO 6007 ST Mode D'emploi

Replacing the oven light

IMPORTANT:
The oven light must have these precise features: a) it
must be able to resist high temperatures (up to 300°C)
b) power supply: see V/Hz indicated on data plate.
c) power 25W.
GB
d) E 14 connection. Before proceeding, disconnect
the appliance from the main electricity supply.
- To prevent damage, place a tea cloth in the oven;
- unscrew the glass cover of the light;
- unscrew the old light bulb and replace it with the new
one;
- put back the glass cover and remove the tea cloth;
- connect the appliance to the main electricity supply;

Removing the oven door

The oven door can be removed quickly and easily. To do
so, proceed as follows:
- Open the door fully.
- Lift the two levers shown in fig.
- Close the door as far as the first stop (caused by the
raised levers).
- Lift the door upwards and outwards to remove it from
its mountings.
To replace fit the door, fit the hinges in their mountings
and lower the two levers.
20
16