Rear Panel - FONESTAR ZS-11 Mode D'emploi

REAR PANEL

1.- POWER: microphone on/off switch.
2.- DC 24 V: socket and euroblock terminals for connection of 24 V DC mains adapter.
3.- COM: audio and data input/output connectors to connect to the zone system mod. ZSC-1110 or other
microphones mod. ZS-11.
4.- OUTPUT: microphone unbalanced line output, the LINE IN input and the chimes, 6.3 mm jack connector.
5.- LINE IN: unbalanced line input for the broadcasting of music in the selected zones from the microphone
or from the zone system ZSC-1110, 6.3 mm jack connector.
Note: the microphone has priority over the LINE IN input.
6.- MIC VOL: volume control of the microphone.
7.- CHIME VOL: chime volume control.
- 3 -
EN