FONESTAR ZS-11 Mode D'emploi page 2

EN
DESCRIPTION
- Microphone with zone selector for priority paging and chimes for zone system mod. ZSC-1110.
- Selection of up to 300 zones.
- Connection via Cat 5e cable.
- The zone system mod. ZSC-1110 accepts up to 6 microphones mod. ZS-11.
CONTROLS AND FUNCTIONS
FRONT PANEL
1.- MIC: balanced microphone input, XLR connector.
2.- DISPLAY: indicates zone selected.
3.- Z1 – Z10: buttons which activate/deactivate each of the output zones. If the LED indicator is lit this
means that the corresponding zone is activated.
4.- ZONE SYSTEM FORWARD/REWIND: zone system selection buttons. In the event of having several
zone systems mod. ZSC-1110 connected to each other, if the display shows the value 01 we must select
from zones 1 to 10, if 02 is shown we must select from 11-20, etc.
5.- MIC ON/OFF: button to activate/deactivate the microphone.
6.- CHIME ON: plays the chimes.
7.- +10 ZONES: selection button of all the zones of the selected system (this system will be shown in the
display).
8.- ALL ZONES: general call button, activates or deactivates all the zones simultaneously. If the LED
indicator is lit it means that the general call function is activated.
- 2 -