Technical Data - Kathrein UFOmini Guide

Inserting the CA modules
Important
Risk of damage to the CI slots. Insert the CA modules (CAM) into
the slots ②/④/⑥ with the front face uppermost; and into the slots
①/③/⑤ with the back face uppermost (Fig. 5). See also the instruc-
tions for use supplied with the CAM.
1. Using a Torx T20 screwdriver, undo the securing screws for the CI slot
cover.
2. Insert the CA modules as shown in the example in Fig. 5.
3. Secure the CI slot cover.
Configuring
1. Install and start the USW 800 configuration software on the computer.
2. Configure all the head-end parameters as required. In this case:
– The USW 800 will communicate with the master and detect the slave automatically.
– The current version of the USW 800 and the user guide are available free of charge at www.kathrein.com.

Technical data

Inputs
Sat-IF input
Terrestrial/cable input
Decoupling
Return loss
Permissible level difference
DiSEqC 1.0
TM
Switching levels
Remote feed current for LNB
Remote feed current for active antenna (5 V) mA
Frontend
DVB-S/-S(2)/-T/-T(2)/-C
Frequency grid
Input level range
Permissible level difference
Demodulation DVB-S
Standard
Frequency range
Input symbol rate QPSK
Code rate (Viterbi)
6 / 8
dB
dB
dB
vert./horiz., low/high; sat. pos. (A/B/C/D)
V/kHz
mA
max. 60 (at F socket nos. 1, 2, 4)
MHz
dBµV
dB
MHz
MS/s
6
5
Fig. 5: Inserting the CA modules into the
CI slots
4 x F connectors, 75 Ω
1 x F connectors, 75 Ω
> 25
typ. 8
max. 12 (an inputs 1, 2, 3, 4)
14/18, 0/22
max. 250 (at F socket no. 3),
100 (at F socket no. 5)
8 x
1
60 ... 100
20
EN 300 421
950 ... 2150
1 ... 45
1/2, 2/3, 3/4, 5/6, 7/8
4 2
3
1