Mitsubishi RDF225WG Mode D'emploi page 9

Controls
Corner Purity Control: Eliminates picture impurities that may result from the earth's
magnetic field. While in the sub-menus (TL: Top Left, TR: Top Right, BL: Bottom Left, BR:
Bottom Right or L/R: Left/Right, use the –/+ control buttons to fine tune the Corner Purity
corrections.
NOTE: We recommend that you perform Corner Purity correction while running a typical
application such as a spreadsheet or text document.
Tools 2
Language: OSD controls menus are available in 6 languages.
OSD Position: You can choose where you would like the OSD controls menu to appear on
your screen. Selecting OSD Position allows you to manually adjust the OSD controls menu
position from among Center, Top left, Top right, Bottom left and Bottom right.
OSD Turn Off: The OSD controls menu will stay on as long as it is in use. In the OSD Turn
Off sub-menu, you can select how long the monitor waits after the last touch of a button
for the OSD controls menu to disappear. The preset choices are 5 thru 120 seconds.
OSD Lock Out: This control completely locks out access to all OSD controls functions except
Brightness and Contrast. When attempting to activate OSD controls while in the lock out
mode, a screen will appear indicating that OSD controls are locked out. To activate the
OSD Lock Out function, press SELECT and hold + down simultaneously. To deactivate the
OSD Lock Out, press SELECT and hold + down simultaneously.
Enable:
Off Mode:
Disable:
NOTE: For standard systems and graphics boards, keep the factory setting at ENABLE.
NOTE: Don't keep the monitor on when 'No Signal' is applied. This could cause image
burn in on the screen due to the 'No Signal' message being displayed.
Clamp Pulse Position Control: Operating your monitor at a nonstandard timing may
cause images to appear darker than normal or have color distortion. Use of the EdgeLock
control will adjust images to their normal state.
Hot Key: This selection allows you to use
contrast control.
Factory Preset: Selecting Factory Preset allows you a reset most OSD control settings back
to the factory settings. A warning statement will appear to confirm that you do want to
reset ALL settings. Individual settings can be reset by highlighting the control to be reset
and pressing the RESET button.
Information
Display Mode: Indicates the current mode and frequency setting of the monitor.
Monitor Info: Indicates the model and serial numbers of your monitor.
RDF225WGmanual051804.p65
–continued
The Off Mode works normally and all
stages of energy savings are utilized.
The Off Mode is not used.
7
7
as brightness control and –/+ as
5/18/04, 10:03 AM