Specifications; Monitor Specifications - Mitsubishi RDF225WG Mode D'emploi

Specifications

Monitor
Specifications
Picture Tube
Viewable Image Size:
Luminanace (peak)
Color Coordinates
Color Gamut
Input Signal
Analog input:
Display Colors
Horizontal:
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
RDF225WGmanual051804.p65
RDF225WG
Monitor
Diagonal: 22 inch/550mm
20 inch/508mm
Radius: 50,000 mm
100cd/m 2 @ 9300K
80cd/m 2 @ 6500K
70cd/m @ 5000K
2
Red: x=0.650, y=0.321
Green: x=0.208, y=0.690 – long phosphor persistance time
Blue: x=0.151, y=0.070
97.6% of Adobe RGB
93.3% of NTSC
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Sync on Green video (Positive) 0.7 Vp-p and sync
Negative 0.3 Vp-p
Unlimited number of Colors
30 kHz to 140 kHz
Vertical: 50 Hz to 160 Hz
640 x 480 @ 50 to 160 Hz
800 x 600 @ 50 to 160 Hz
1024 x 768 @ 50 to 160 Hz
1280 x 1024 @ 50 to 127 Hz
1600 x 1200 @ 50 to 109 Hz
1800 x 1350 @ 50 to 98 Hz
1800 x 1440 @ 50 to 92 Hz
1856 x 1392 @ 50 to 95 Hz
2048 x 1536 @ 50 to 86 Hz
396 mm/15.6 inches
Vertical: 297 mm/11.7 inches
406 mm/16.0 inches
304.6 mm/12.0 inches
AC 100 – 240 V/220-240V, 50-60 Hz
1.35A @ 100-240 V/0.65A @ 220-240V
495 mm (W) x 486 mm (H) x 477 mm (D)
19.5 inches (W) x 19.1 inches (H) x 18.8 inches (D)
29.3 kg
64.6 lbs
+5°C to +35°C / +41°F to +90°F
Humidity: 10% to 90%
Feet: 0 to 10,000 Feet
-20°C to +60°C / -4°F to +140°F
Humidity: 10% to 90%
Feet: 0 to 50,000 Feet
NOTE: Technical specifications are subject to change without notice.
10
10
Notes
90° deflection, 0.24 mm grille pitch,
wide color gamut phosphor, aperture
grille CRT, G-WARAS coating
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
5/18/04, 10:03 AM