Compare the illustrations with your generator to familiarize yourself with the locations of various
controls and product warnings.
120/240 Volt AC, 30 Amp
Locking Receptacle
Hour Meter
Start
Switch
Rocker Switch
Circuit Breaker
Low Oil
Circuit Breakers
Shutdown
120 Volt AC, 20 Amp, GFCI Duplex Receptacles — Used
to supply 120 Volt AC, single phase, 60 Hz power for
electrical lighting, appliance, tool and motor loads.
120/240 Volt AC, 30 Amp Locking Receptacle — Used to
supply 120 / 240 Volt AC, single phase, 60 Hz power for
electrical lighting, appliance, tool and motor loads.
Circuit Breakers (AC) — The 120 Volt AC, 20A GFCI
duplex receptacles are provided with "push to reset" 20
Amp circuit breakers to protect the generator against
electrical overload.
120 Volt AC, 20 Amp
GFCI Duplex Receptacles
Hour Meter — Displays and records how many hours your
generator has run (up to 9,999.9).
Low Oil Shutdown — This unit is equipped with a low oil
protection device. Oil must be at proper level for engine
to run. If the engine oil drops below a preset level, an oil
switch will stop the engine. Check oil level with dipstick.
Rocker Switch Circuit Breaker — The 30 Amp locking
receptacle is provided with a 2 pole rocker switch circuit
breaker to protect the generator against electrical overload.
Start Switch — Turn key to START position to start engine.
Turn key to OFF position to switch off engine.
Features and Controls
202997
EN5