Lavorwash GV Vesuvio Manuel D'instructions page 21

- Only use a forklift truck or a crane to lift the machine, since it is not perfectly balanced.
- Lift the machine only by means of steel cables or bands duly dimensioned according to the machine weight.
- Lift the machine by means of the safety hooks.
- No foreign operator must stay or pass in the handling area while the operators responsible for the machine transport will have to keep
at a suitable distance to avoid being intercepted by the machine.
- Never make sudden manoeuvres while lifting and handling the machine so that it cannot intercept any people or object present in the
handling area.
- An operator staying outside the handling area will have to follow all the handling activities and signal any possible obstacle the crane operator
cannot see.
- In case of sea transport, it is advisable to protect the various machine parts by covering them with antirust lubricating agents and to add some
bags containing hygroscopic salts to the packaging.
- Once positioned on the truck (or any transport mean) the machine must be braced by ropes, steel cables or wooden wedged duly dimensioned
according to the machine weight.
- The machine must be installed in a place where the best hygrothermometrical conditions are observed for the safety of the operator in order to
reduce the possibility of fatigue to the minimum and to allow the operator to work in the maximum safety conditions.
- The machine installation area will have to be well-ventilated and free from explosive gases.
- The temperature of the machine installation area will have to range between 10°C and 35°C.
View with the machine main references
Pressure gauge
Boiler drain
cock
WARNINGS
Machine installation
WARNINGS
Steam
gun
Control
panel
Main
switch
Gun connection
plug
21