Lavorwash GV Vesuvio Manuel D'instructions page 18

Introduction
This manual has been created to help the user understand and learn to use the machine correctly. For this reason it is recommended that the
manual be read completely and with care before using the machine.
This manual instruction was written by the Manufacturer and is considered as an integral part of the machine.
Every machine is supplied with its own instruction manual. The User is responsible for the safekeeping this manual for the total period of the
machine working life, and the manual must be kept in a safe place and destroyed only when the machine has been demolished.
The Manufacturer will not be held responsible for any modifications not included in this manual, or for any tampering with this manual, or with
the machine, after the machine has been delivered to the customer.
The manufacturer reserves all rights to the contents of this manual and all reproduction, whether total or partial is strictly prohibited under any
form (printing, photocopying, microfilming, or other means) as well as computer processing or diffusion by electronic means to any physical or
legal parties without authorisation and registration.
Aim of this document
The aim of this manual is to provide the User with all the information and advice necessary for correct machine use. All instructions must be
obeyed scrupulously to ensure the protection of the operator against all danger. For this reason, the User is advised to:
- keep this manual easily accessible at all times for reference, and to ensure that all personnel using the machine have read and understood
the manual completely.
- The manual must be included with the machine if sold or exchanged and given to the next user.
Manual use and safekeeping
This manual has been written for the machine user, and for all the personnel in charge of transport and handling, installation, use, supervision,
maintenance and demolition.
This manual provides all instructions on machine use according to the project and technical features, for handling, adequate and safe installation,
assembly setting, tuning and use. It also provides all instructions for maintenance operations, how to order spare parts, and provides warning
advice on possible additional danger risks.
In particular, the manual must be readily available for the following information:
- working conditions for machine use;
- the operator.s work control position;
- as well as instructions concerning: - setting up; - use; - transport; - installation; - assembly and disassembly; - setting and tuning interventions;
- repairs and maintenance; - possible training instructions.
Respecting current legislation
As well as the rules included in this manual, all current specific safety standards against danger in the work area must be correctly observed.
Information for the User
1 - This manual describes the current technical level of the machine and cannot be considered incomplete if the machine is upgraded as a
result of new know-how.
2 - The manufacturer reserves the right to update the machine and this manual without the necessity to update previous models and manuals.
3 - The materials used on this machine can be modified at any time as a result of technical evolution without prior notice.
4 - In the case where the machine supplied to the customer is not equipped with electrical controls and protection ( electrical control panel
on the machine), the manufacturer assumes no responsibility concerning safety protection from electrical parts which are not in compliance
with instructions provided and recommended in this manual. In all cases the current safety standards concerning electrical parts for
accessory machine equipment are the sole responsibility of the customer who must provide for their correct standard and suitability for
the use in question.
5 - The manufacturer will not be held responsible for any damage or injury as a result of: - incorrect use; - incorrect machine use; - use by
untrained personnel; - inappropriate use not included in these instructions; - use contrary to current legislation and safety standards; -
use with faulty main line supply; - use in the case of serious lack of maintenance; - use after unauthorised changes or interventions (
changes without written authorisation from manufacturer); - use with non original spare parts or parts not specifically recommended
for the machine; - use after disregarding either totally or partially specific instructions provided in this manual.
6 - The general sales guarantee is not valid in the following cases: - bad maintenance; - problems as a result of incorrect use; - use by
inexperienced personnel; - excessive use over machine performance limits; - excessive mechanical, electrical or pneumatic strain; - use
when the machine is not in good performing condition (point 5).
Eventual requests for other copies of this document must be ordered from the Manufacturer.
18
General information about the operating handbook