Map Data; User Registration Key Display - Eclipse CD3100 Manuel D'utilisation

Map data

The map data used by the main unit was created based on information provided by NAVTEQ
When using the map data, be aware of actual road conditions and obey traffic rules.
Copying, publishing or using maps in electronic media without express written consent is forbidden.
WARNING
• Make sure to follow the actual traffic regulations when driving.
• During your vehicle while only following guidance point instructions may lead to traffic violations
and cause accidents.
• Do not modify this system for use other than that specified herein. Also, do not deviate from the
installation procedures described herein, ECLIPSE will not be held liable for damages including,
but not limited to serious injury, death or property damage resulting from installations that enable
unintended operation.

User Registration Key display

User Registration Key is your CD3100's unique ID. In order to use the ECLIPSE web site (E-iSERV), a
16-digit User Registration Key is necessary.
1
Check that the main unit is in standby mode.
2
Press the [SCREEN] button.
The 16 digits of your User Registration Key will be displayed.
Pressing the [SCREEN] button will display the first 8 digits. Pressing the [SCREEN]
button again will display the latter 8 digits.
ATTENTION
Your User Registration Key is a 16-digit ID composed of numbers 0-9 and letters A-F.
How to operate the Area Shot function (U.S.A./CANADA only)
TM
.
VII
35