THOMSON CYCLOFLEX V2 Manuel D'instructions page 50

TROUBLESHOOTING
Problem
The Cycloflex V2
vacuum cleaner
does not work.
The suction of
the device
decreases
The motor is
running making
an abnormal
noise.
Possible
causes
Check the
power supply.
The suction
opening is
blocked.
The dust container
or filter is full
of dust.
The motorized floor
brush is tangled
with hair, waste,
etc.
After cleaning, the
situation remains
the same.
The main suction
pipe or aluminum
tube is blocked.
EN-22
Solutions
Please make sure
the power of the
device is maximum
before use.
Clean the suction
opening.
Clean the container
and the dust filter.
Clean the
roller.
Please contact our
after-sales service for
maintenance.
Clean the tube.