THOMSON CYCLOFLEX V2 Manuel D'instructions page 48

Cleaning the outlet HEPA filter
In order to guarantee the performance of the product, it is recommended to
clean it regularly and replace it after 3 to 6 months (depending on use). Press
and hold the dust bin release button, remove the housing, turn the cover,
remove the HEPA filter and dust off the HEPA filter.
If the dust accumulation is too great, wash it thoroughly and dry it before installing
it in the main case.
When washing, use cold water and dry the filter thoroughly (usually in
sunlight for 24 hours, then put it back into the case.
Motorized floor brush
It is recommended to clean the motorized floor brush every 4 to 5 uses. Put the
deviceout voltage
To do this, turn the motorized floor brush over and open the locking button on the
fixed cover with a coin. (Image 20) Remove the roller, by lifting one end of the
roller and then removing it Image 21)
Use scissors to remove the
When cleaning is complete, push a
then clip the other
Put back the cover and
Image 20
and remove the electric brush.
hair, animal hair or other dust. (Image
extremity. (Image
lock it.
Image 21
end of the roll into the motorized floor brush,
23)
Image 22
EN-20
22).
Image 23