Care And Maintenance - THOMSON CYCLOFLEX V2 Manuel D'instructions

About the charge indicator
Operating status: the blue indicator light is constantly on.
Low power status: the red indicator light flashes and the battery needs to be
charged.
Battery charge indication: While charging: The red indicator light is on.
Fully charged: The red indicator light turns blue.
NOTE :
If you do not use the Cycloflex V2 vacuum cleaner for an extended period (more
than 3 months without use) please charge the battery for 3 hours (it is not necessary
to fully charge it). This allows the charge to be reactivated before use. On the other
hand, respect the normal charging time indicated. The battery should not be
charged for an extended period of time. If you exceed the charging time beyond
the stated time, please stop immediately. The battery may heat up, deform or burn.
If the battery is not in use for a long time or if it has suffered a deep discharge, its
autonomy may decrease during the first uses. It is recommended to fully discharge
it after charging it (usually more than 6 hours). It is necessary to repeat the action
twice.

CARE AND MAINTENANCE

Product Care
In order not to affect the performance of the device, it is recommended to
maintain its components regularly. Before cleaning the main case(part portable),
make sure the device has stopped working and the product is not charging.
Scrub with water or neutral detergent. Before rubbing, make sure the cloth is dry.
Do not let water get into the internal parts of the Cycloflex V2 vacuum cleaner
(Image 19)
After cleaning, do not expose it to direct sunlight or put it in a damp place.
Image 19
EN-18