THOMSON CYCLOFLEX V2 Manuel D'instructions page 40

INSTRUCTIONS OF PRODUCT USE
Aluminum pipe installation instructions
Push the end of the aluminum tube horizontally into the suction port of the main
housing to make sure it is connected and not loose. Installation is successful after
a "Click" sound. (Image 1)
•
To remove the aluminum tube, hold the main housing with one hand and pull
it out with the other hand by pressing the button. (Image 2)
Image 1
Motorized floor brush installation instructions.
•
Connect the motorized floor brush into the end of the tube. Installation is
successful once with a "click" sound. (Image 3).
•
If you want to remove the brush, hold in one hand and simultaneously press
the button with the other hand: the brush can be removed. (Image 4)
•
The motorized floor brush can also be connected to the main unit.
Image 3
EN-12
Image 2
Image 4