Nuova Simonelli Oscar Mood Manuel D'instructions page 14

Table des Matières

Publicité

The operating temperature must be within the range of [+5, +30]°C.
At the end of installation, the device is switched on and taken to rated operating
conditions, leaving it in a state in which it is "ready for operation".
After reaching the "ready for operation" condition, the following dispensing oper-
ations are carried out:
100% of the coffee circuit through the coffee dispenser;
Open the steam outlet for 1 minute.
At the end of installation, it is good practice to draw up a report of the operations.
It is forbidden to leave the machine switched on without the presence and sur-
veillance of a qualified operator. Simonelli Group is not responsible for damages
caused by failure to comply with this prohibition.
Be extremely careful when using the steam nozzle. Never place your hands under
the nozzle and never touch it right after use.
Before cleaning the unit follow the instructions given in this manual carefully.
Once started the washing machine, do not interrupt, the detergent residue may
remain inside the delivery unit.
In case of breakdown or poor function, turn off the unit. Never tamper with the
unit. Contact only professionally qualified personnel. Only the manufacturer or
an authorized service center can make repairs and only using original spare parts.
Non compliance with the above can compromise machine safety.
In case of fire, disconnect power to the machine by turning off the main switch.
Its absolutely avoid to extinguish the fire with water while power to the machine
is on.
Before performing any sort of maintenance, the authorized technician must turn
off the unit and unplug it from the mains.
When the machine is left unattended for a long period, close the water inlet tap.
14
Should you decide to stop using this type of unit, we
suggest you render it inoperable by unplugging it
and cutting the power supply cord.
Never dispose of the machine in the environment:
to dispose of the machine, contact an authorized
center or contact the manufacturer for pertinent in-
dications.

Publicité

Table des Matières
loading

Table des Matières