Mute" Function; Summary Table Of Controls; Battery; Battery Installation - Nolan N-Com Sécurité Et Instructions D'utilisation

NOLAN nCOM bluetooth 0024

7.2. "Mute" function

The "mute" function disconnects both microphones, making it possible to listen without any interference that may be picked
up by the microphones.
Switching on: Press key " " and keep it pressed for about 2 seconds (double buzz in the earphone).
Switching off: Press key " " and keep it pressed for about 2 seconds (double buzz in the earphone).

8. SUMMARY TABLE OF CONTROLS

FIG. 10
Switching on
Switching off
Volume +
Volume -
Answering a call
Vocal call
Hanging up after a call/Rejecting it
Deactivating the Intercom mode
Reactivating the Intercom mode
Microphones off
Microphones on
Affiliation (from switched off system)
Hanging up the phone (HF profile)
Picking up the phone (HF profile)
Call transfer (HF profile)

9. BATTERY

9.1. Battery installation

The battery has to be installed in the Basic Kit. Please refer to the specific Basic Kit instructions for your helmet to properly
install the battery.

9.2. Warnings on the use of rechargeable batteries

The device runs on a rechargeable battery. New batteries achieve the highest performances only after being completely charged
and discharged two or three times. The battery can be charged and discharged several times, although it does deteriorate with
use. When continuous talking and pause times are significantly reduced compared to normal, it is time to replace the battery.
23-05-2006 16:15
L L
x
x
x
Pagina 30
x
x
x
x
x
x
30
ENGLISH
x
x
x
x
x
x