Copyright; Before You Start; Fitting The Purée Attachment; Removing The Purée Attachment - SilverCrest SSM 300 B1 Manuel D'utilisation Et Informations Sur Les Services

6. Copyright

All the contents of this operating instructions are protected by copyright and provided to the reader for
information only. Copying data and information without the prior explicit written consent of the author is
strictly forbidden. This also applies to any commercial use of the contents and information. All texts and
diagrams are up-to-date as of the date of printing. Subject to change without notice.

7. Before you start

Remove the SSM 300 B1 stick blender and all accessories from the packaging and check that the package
contents are complete. Remove all protective films. Keep the packaging material away from children and
dispose of appropriately.
Before first use, clean the stick blender carefully as described in the chapter on "Cleaning".
Dry all parts completely before assembling the stick blender.
The motor unit (3) has the following
markings: and

marking ( ) on the purée attachment
(4). These markings help you fit and
remove the purée attachment (4).
7.1. Fitting the purée attachment

Place the motor unit (3) on the purée attachment (4) so that the arrow marking () points to the open
lock on the motor unit (3). See figure B.

Now twist the purée attachment (4) clockwise until the arrow marking () points to the closed lock
on the motor unit (3). You should hear and feel the purée attachment (4) click into place.
7.2. Removing the purée attachment

Twist the purée attachment (4) anticlockwise until the arrow marking  on the purée attachment (4)
points to the open lock

Now remove the motor unit (3) from the purée attachment (4).
. There is an arrow
on the motor unit (3). See figure C.
SilverCrest SSM 300 B1
English - 35