ULTRAFLEX
INTRODUCTION
This installation and maintenance manual constitutes an integral part of the product and must be made
easily accessible for personnel using the product and performing maintenance work on it.
The user must know the content of this manual.
ULTRAFLEX shall not be held liable for any inaccuracies due to printing errors in the manual.
Without altering the basic features of the product described ULTRAFLEX reserves the right to make any changes to
descriptions, details and illustrations that it may consider appropriate for its improvement or for manufacturing
or commercial reasons at any time, without being required to update this publication immediately.
ALL RIGHTS RESERVED. Rights to publication, trademarks, logos and photographs of ULTRAFLEX products present
in this manual are the property of ULTRAFLEXand may not be reproduced in full or in part. Great care has been
taken to collect and verify documentation to make this manual as complete and easy to understand as possible.
None of the information obtained in this publication may be interpreted as a guarantee or an express or implicit
condition- including but not limited to, the guarantee of suitability for a particular purpose. None of the information
contained in this publication may be interpreted as a change to or assertion of the terms of any contract of
purchase.
WARNING
The product must be installed by experienced personnel to ensure correct functioning of the product and its
components. In the event of breakage of the components or malfunctioning, contact specialized personnel
or our Technical Assistance Service.
UFLEX S.r.l.
Via Milite Ignoto,8A
16012 Busalla (GE)-Italy
Tel: +39.010.962.0239 (Italy)
Tel: +39.010.962.0244 (international)
Fax: +39.010.962.0333
Email: ut@ultraflexgroup.it
www.ultraflexgroup.it
WARRANTY
ULTRAFLEX warrants that its products are built according to the standards of good workmanship and are free
of defects in materials and workmanship.
This warranty is valid for two years starting on the date of manufacture with the exception of cases in which
products are installed and used on working vessels or on vessels commercial use, in which case the
guarantee is limited to 1 year from the date of manufacture.
This warranty is limited to free replacement or repair of the item, which must be returned carriage paid,
provided we find it to be effectively defective in materials and/or workmanship.
The warranty does not cover any direct or indirect damages, The warranty specifically does not cover, and
we shall not be liable for (except for replacement or repair of defective items under the terms and conditions
set forth above), malfunctioning of our products if their failure or poor functioning is attributable to incorrect
installation or to negligent or improper use.
This warranty does not cover products installed on racing boats or used in a competitive context. The
descriptions and illustrations in this manual are indicative only.
Please contact our Assistance Service for more detailed information.
The components of ULTRAFLEX steering and control systems with EC marked components. (See Art. 3 and Art.
5 of directive 94/25/EC.) Note that the ULTRAFLEX warranty shall be automatically forfeited if any ULTRAFLEX
components are installed in a steering and control system along with products of other brands.
TECHNICAL ASSISTANCE SERVICE
SINGLE LEVER CONTROL B501 AND B502
Installation and maintenance manual
North - South - Central America:
U F LE X USA
6442 Parkland Drive
Sarasota, FL 34243
Tel: +1.941.351.2628
Fax: +1.941.360.9171
Email: uflex@uflexusa.com
www.uflexusa.com
page 5
-
of 63