Coleman CSA B140.9.2 Mode D'emploi page 7

Installing Tank
n Insert GENERATOR into large hole
on front of stove and into mixing
chamber above burner. Engage
TANK CLIPS into slots on front of
stove. (Fig. 10)
n Swing WIND BAFFLES out and insert
the WIRE CLIPS into slots in ends of
stove. (Fig. 11)
Lighting Main Burner
WARNING
• Perform leak test outdoors.
• Extinguish all open flames.
• NEVER leak test when smoking.
• Do not use the outdoor stove until connec-
tion has been leak tested and does not leak.
WARNING
• BURN HAZARD
• Never leave stove unattended
when hot or in use.
• Keep out of reach of
NEVER FILL OR LIGHT STOVE
INSIDE HOUSE, CAMPER, OR TENT
Fig. 10
Fig. 11
children.
.
English-5
Close AUXILIARY VALVE. Turn
n
LIGHTING LEVER to UP position.
(Fig. 12 & 13)
Fig. 12
n Hold lit match at MAIN BURNER
before opening the FUEL VALVE.
Open FUEL VALVE quickly, at least
two full turns. (Fig. 14)
CAUTION
A persistent high, yellow flame
indicates flooding or a leak. Close
fuel valve, let flames burn out and
stove cool. Turn stove upside down
to empty any fuel from burner and
wipe dry. Review instructions and
relight stove.
n Wait one full minute then turn
LIGHTING LEVER down. (Fig. 15)
n Open PUMP KNOB and pump
additional pressure into tank.
(Fig. 16 & Fig. 17)
Fig. 16
Fig. 13
Fig. 14
Fig. 15
Fig. 17