Technical Data - Atag ES9011QM Mode D'emploi

assembly
5
6

technical data

GB 12
4. Secure the telescopic pipe at the right height to the
sidepieces with screws (4).
5. Secure the entire unit to the ceiling bracket (5).
4
6. Make the plug connection.
7. Connect the discharge duct.
8. Lower the lowermost part of the telescopic pipe onto the
extractor hood.
type number:
power supply:
connected load:
dimensions (h x w x d): see "appliance dimensions"
This appliance conforms to current CE guidelines.
see data plate in the hood
230 V - 50 Hz
see data plate