General; For Your Safety - Atag ES9011QM Mode D'emploi

general

for your safety

This appliance should be connected by a
registered fitter. Damage arising from incorrect
connection or incorrect fitting is not covered by
the guarantee.
Never flambe under an extractor. The high
flames can cause fire. Even if the ventilator is
switched off.
When deep-frying, always keep a close watch.
Ensure a sufficient supply of fresh air.
Switch the extractor hood on before starting to
cook. Leave the extractor hood on for about ten
minutes after you have finished cooking.
Clean the appliance regularly, as shown in
'maintenance'. This prevents fire hazards and
ensures that the extractor hood continues to
work optimally.
GB 2
In the unlikely event that the unit has to be
repaired, disconnect the unit from the power
supply before performing the repair. Preferably
by taking the plug out of the socket or by turning
off the mains switch. You must also disconnect
the unit from the power supply if you want to
clean the inside of the extractor hood or replace
a bulb! Only use the same sort of light bulbs
with the same Wattage.
In view of possible sharp edges on the chimney
we advise you to wear working gloves when
fitting the chimney.