Tools You Will Need; Care And Cleaning - Toto TSST Manuel D'installation Et D'utilisation

Pipe Tape Thermometer
BEFORE YOU START INSTALLATION
„ Observe all local plumbing codes�
„ Flush all piping thoroughly before installing the valve�
„ Make sure the water supply is shut off�
„ Read these instructions carefully to ensure proper installation�
„ TOTO reserves the right to update product design without notice�
®
„ Check to make sure you have the following parts indicated below:
Your new valve is designed for years of trouble-free performance� keep it
looking new by cleaning it periodically with mild soap, rinsing thoroughly
with warm water and drying with a clean, soft cloth� Do not use abrasive
cleaners, steel wool or harsh chemicals, as these will dull the finish� Failure to
follow these instructions may void your warranty�

TOOLS YOU WILL NEED

120°
70°
10°
Adjustable
Plaster
Guard
CARE & CLEANING
Adjustable
Pliers Wrench
Valve
3
Screwdriver