How To Use - Kasanova ELR000500NOC Manuel D'instruction

VENTILATORE COMBINATO

HOW TO USE

1. Before using, ensure that the product is not damaged. Check if the voltage
indicated on the device corresponds to the voltage in your house. Once you
connect plug to power source, you will hear a beep sound. After a few seconds,
the display and the indicator light will be switched on and the fan enters into
standby mode.
2. Power on
When the fan is at rest, press the switch. You will hear a beep sound twice,
then the fan starts working at low power. Now, you can select the speed mode
pressing the corresponding button on the control panel or on the remote control.
3. Speed adjustment
After starting the fan, you can adjust the volume of airflow by lightly pressing
the "Speed" button placed on the control panel where there is the part related to
the functions. You can select three types of speed: low, medium and high. The
corresponding air circulation mode can be adjusted on the control panel.
4. Left and right movement adjustment
Press the "Swing" button on the control panel or on the remote control to turn
on the self-winding movement to the right and left to improve air circulation in
the room. Press again the button to disable this function.
5. Oscillation adjustment
Press the "Oscillation" button on the control panel or on the remote control
to turn on the automatic swinging mode that works in a circular direction to
improve air circulation in the room. Press again the button to disable this
function.
6. Ionization function
When the fan is on, lightly press the "Ion" button to turn on this function. The
corresponding symbol will light up on the control panel. Press again the button
to disable this function.
7. Moistening/misting function
When the fan is on, press the "Mist" button on the control panel or on the
remote control, the display will show the diagram of the moistening function.
The green light indicates the normal moistening function, while the red light
warns you that there is not enough water in the tank and that it must be filled.
Press again the "Mist" button to disable this function.
8. Ultrasonic anti-mosquito function
When the fan is on, press the "Mosquito" button, the display will show the
corresponding symbol indicating that the anti-mosquito function is on. Press
again the button to disable the function. This mode operates independently
both when the fan is on and when in standby. Insert an anti-mosquito plate (not
included) in the appropriate slot on the back of the appliance.
9. Timer function
9