Pièces de rechange
1
6
5
4
45
No.
Description des pièces
1
Bouchon de vidange
2
Unité du régulateur thermal Dynamot
3
Ensemble de support de fixation
4
Assemblage de solénoïde & membrane
5
Ensemble du couvercle du contrôle
6
Valve de mélange thermique avec unité SMA
7
Bague de montage
2
7
3
4
Do not use a broken or loose power outlet. It could
cause fire or electric shock.
Do not use water, acidic or alkaline detergents, and
thinner on the cord plug
It may cause fire.
Only use the designated power source (100-120 V AC,
50-60HZ).
Otherwise, it could cause a fire hazard.
Do Not!
Do not handle the cord aggressively, such as bending
the cord or placing heavy objects on it.
Do not exceed the rating of the outlet and wiring
equipment. If the rating is exceeded by connecting
multiple units to one outlet at the same time, it may
cause a fire due to heat generation.
Do not touch the stop value of the controller; the
surface may be hot.
This may cause personal injury.
Do not pull the plug with a wet hand.
Do Not
Touch
Do not touch the power plug if there is lightning.
Hold the plug body to pull the plug out of the outlet. If
pulled by the cord it could damage the plug and/or cord.
The power plug must be pushed in all the way.
Mandatory
Periodically check the piping for leakage. Ignoring this
may cause property damage.
Do not reverse the hot and cold water connections.
Mandatory
Never connect the piping for hot and cold water in
reverse. When someone is intending to have cold water
and hot water actually comes out, it could cause burns.
Warning
Replace
No
leakage!
2