Publicité
Les langues disponibles
Les langues disponibles
2. Install defl ector
Shelf detail showing the deflector vent during installation.
Position deflector vent and mark holes. Pre drill using a
Figure 3A
3. Place the drawer adjacent to the wall or cabinet opening. Plug
the power supply cord into the electrical outlet.
4. Carefully guide the drawer into the prepared opening. Avoid
contact with the sides of the cutout opening and also pinching
the cord between the oven and the wall.
5. Slide the drawer all the way back until the mounting fl anges
touch the cleats mounted in the cabinet opening.
6. Open the drawer. Using the 4 holes on the drawer as a template,
pre drill the cabinet using a 1/16" (1.57 mm) bit. See Figure 4.
7. Secure the drawer with the 4 screws supplied.
Move oven location
downward for extended
countertops for better
viewing angle.
7
16
/
"
8
(428.62 mm)
flush opening
height
Front face of cabinet
Figure 2C
1
/
" (1.57 mm) bit before mounting.
16
Anti-Tip
block
3
/
"
(19.05 mm)
4
shelf
3
1
/
" (44.45 mm)
4
front face of shelf
Side view
Shelf detail showing the deflector vent installed.
Figure 3B
Figure 4
3
Mounting
flange
Publicité
