Preparation; Charging The Battery - dji ROBOMASTER EP CORE Guide De Démarrage Rapide

Preparation

1. Charging the Battery

Charge the battery to bring it out of hibernation
before using for the first time.
Charging Time: Approx. 1 hour and 30 min.
2. Preparing the Screwdriver
A #1
The package includes a screwdriver handle and two
bits. The #1 bit is used with screw box A. The smaller
end is for T2 screws, while the larger end is for the
other screws in screw box A. The #2 bit is used with
screw box B. The smaller end is for all the screws in
screw box B, while the larger end is not used. Make
sure to use the screws with a suitable bit.
100-240 V
50-60 Hz
#2 B
3. Legend
Refers to the accessories required
including such information as the
screw model and quantity. For
×6
example, the description in this
(M3-A)
illustration indicates that six screws
of the M3-A model are required.
Indicates that the bottom of the
robot is displayed.
Refers to where the required
accessories are located in the screw
box.
4. Cable Connection Instructions
Connect the black, orange, and red cables to the
ports with the corresponding color.
Follow the instructions for cable connection and
wiring to avoid cable damage.
27