Blower Function - BASETech 1661489 Notice D'emploi

• In order to drain the tank, place the product over a drain and remove the locking cap.
• Before the next operation, make sure that the locking cap is installed properly.
d) Blower function
• Connect the suction hose to the air outlet on the motor unit.
• The small stud and the arrow on the connection piece of the suction hose must be at the top.
• Insert the connection piece into the air outlet. Turn the connection piece to the left.
• To remove the suction hose turn the connection piece to the right. Pull the connection piece out of the air outlet.
32